Alternator Bracket Modification

If you have removed the Air Conditioning from your 2.2L/2.5L Mopar, do not plan on putting it back on, and are having a hard time finding a no-A/C alternator bracket, these instructions will help you customize your alternator bracket to save weight, get at the #1 spark plug easier, and look a little better too.

If you would like to buy one of these customized brackets already cut, e-mail JT

 

Start this project by removing the alternator bracket from the engine.
Mark a layout line above the bolt holes to guide the cutting process.
Use a large band saw, cut the top half of the bracket off, then sand the rough parts smooth to touch.
This is what your "custom" bracket will look like installed.

Back to Tech Page

Back to Clone Page